Parts > Mustang Ignition and Electrical Parts

2-WIRE DIVIDER BLUE - $5.50

Two Wire Divider Blue Complete your engine dress-up with distinctive “Motorsport” wire dividers Available in three color combinations Position between loom holders to keep wires neatly routed Packaged in sets of four dividers each Fits 8-10mm wire
Vendor: Ford Racing
Ships in 24 hours

 

3-WIRE DIVIDER BLUE - $5.75

BLUE 8-10mm wires Complete your engine dress-up with distinctive “Motorsport” wire dividers Available in three color combinations Position between loom holders to keep wires neatly routed Packaged in sets of four dividers each.
Vendor: Ford Racing
Ships in 24 hours

 

4-WIRE DIVIDER BLUE - $6.00

Spark plug wire divider Blue Complete your engine dress-up with distinctive “Motorsport” wire dividers Available in three color combinations Position between loom holders to keep wires neatly routed Packaged in sets of four dividers each Fits 8-10mm wires.
Vendor: Ford Racing
Ships in 24 hours

 

SPARK PLUG WIRE LOOM HOLDER BLUE - $7.16

For 289/302/351W Blue Wires Dress up your engine with distinctive Ford “Motorsport” spark plug wire loom holders that keep wires from hot exhaust manifold Vertical-style available in “Bright” chrome 5/16" diameter bolt hole Packaged in sets of two holders each Holds four wires each.
Vendor: Ford Racing
Ships in 24 hours

 

CUSTOM BILLET WIRE LOOMS "FORD OVAL" - $95.00

With Ford logo. All new billet aluminum spark plug wire looms with ball milled logos. Fits 8mm and 9mm wire. Keeps all wires neat and away from headers. Adjustable brackets fit all big and small block engines except FE V-8. Use universal spark plug wires.
Vendor: Ford Racing
Ships in 2-3 days

 

CUSTOM BILLET WIRE LOOMS "V8" - $95.00

With V8 Logo. All new billet aluminum spark plug wire looms with ball milled logos. Fits 8mm and 9mm wire. Keeps all wires neat and away from headers. Adjustable brackets fit all big and small block engines except FE V-8. Use universal spark plug wires.
Vendor: Ford Racing
Ships in 2-3 days

 

CUSTOM BILLET WIRE LOOM "MUSTANG" - $95.00

With MUSTANG Logo. All new billet aluminum spark plug wire looms with ball milled logos. Fits 8mm and 9mm wire. Keeps all wires neat and away from headers. Adjustable brackets fit all big and small block engines except FE V-8. Use universal spark plug wires.
Vendor: Ford Racing
Ships in 2-3 days

 

DISTRIBUTOR CAP AND ROTOR KIT (EXC. EEC) - $53.95

M-12106-A302** * Fits all 1957-93 V-8 distributors (except EEC). High performance replacement for high energy OEM rotor and cap on 1977-93 V-8 distributors. Installation on 1957-76 distributor (which had smaller diameter cap) reduces possibility of crossfire between terminals at high RPMs. * Compatible with Ford Racing ignition wire sets. * Aluminum terminals
Vendor: Ford Racing
Ships in 2-3 days

 

MULTIPORT EFI WIRING HARNESS - $625.00

Revised for simplified installation Fits 1986-93 HO 302 engines Can be adapted to many other Ford V-8 pushrod engines Requires 1989-93 Mustang 302 PCM (not included) Kit consists of harness only from injectors to PCM Works with std 302 and HO 302 firing orders Provisions for fan control output Includes check engine light, compact relay and fuse box and all necessary grommets.
Vendor: Ford Racing
Ships in 2-3 days

 

SENSOR AND RELAY PACKAGE - $99.00

Sensors for use with the M-12071-A50 and M-12071-C302 wiring harness. Kit contains dual-oxygen sensors; EGR solenoid, TAD and TAB solenoids; fuel, air-conditioning and EEC power relays. Engine-mounted and BAP sensors NOT included.
Vendor: Ford Racing
Ships in 2-3 days

 

STEEL 302 DISTRIBUTOR GEAR - $40.00

302 with steel billet and production roller camshaft with point-type or Duraspark distributors. Steel 1.249" 0.467" diameter.
Vendor: Ford Racing
Ships in 2-3 days

 

1986-96 EEC/TFI V-8 DISTRIBUTOR CAP & ROTOR - $45.00

Fits 1986-96 EEC/TFI distributors. Compatible with Ford Racing “Wire Wound” ignition wire sets. Features aluminum terminals.
Vendor: Ford Racing
Ships in 24 hours

 

84-93 5.0 Dyna-Mod Ignition Module - $69.95

The 5.0 Dyna-Mod has more electronic dwell in it over a stock module to provide more coil saturation time. This extra dwell time allows the coil to produce a more intense spark. Improves throttle response and low end power. Mounts in the original factory location without any modifications.
Vendor: Performance Distributors
Ships in 3-4 days

 

94-95 5.0 Dyna-Mod Ignition Module - $69.95

The 5.0 Dyna-Mod has more electronic dwell in it over a stock module to provide more coil saturation time. This extra dwell time allows the coil to produce a more intense spark. Improves throttle response and low end power. Mounts in the original factory location without any modifications.
Vendor: Performance Distributors
Ships in 3-4 days

 

5.0 Screamin' Demon Coil - $69.95

Open up spark plug gaps to a whopping .060" with the Screamin' Demon coil. No drop off in power as RPM's increase. The coil has a brass terminal, rather than aluminum, which provides better conductivity and will resist corrosion longer. This coil is too "hot" for stock plug wires.
Vendor: Performance Distributors
Ships in 2-3 days

 

5.0 Performance Cap and Rotor - $35.00

Super conductive brass terminals deliver ALL of the spark to the plugs. Excellent dielectric strength resists carbon tracking. Available in red or blue. Please specify color in comments box when ordering.
Vendor: Performance Distributors
Ships in 2-3 days

 

5.0 LiveWires - Stock or Long Tube Headers - $105.00

Fits stock, unequal length, or long tube headers. LiveWires come with space age, heat resistant sleeving to provide protection from exhaust heat. The sleeving is heat treated glass braid and is non-flammable and non-corrosive to chemicals. LiveWires are custom fit - no assembly is required. Each wire is numbered at each end for the correct cylinder. LiveWires have a durable and long lasting silicone jacket and insulation. Spiral wound core prevents electronic interference - no radio noise or computer interference. Available in blue, black, red, yellow & purple. Please specify color in comments box when ordering
Vendor: Performance Distributors
Ships in 2-3 days

 

5.0 LiveWires - Equal Length Headers - $105.00

Fits equal length shorty headers. LiveWires come with space age, heat resistant sleeving to provide protection from exhaust heat. The sleeving is heat treated glass braid and is non-flammable and non-corrosive to chemicals. LiveWires are custom fit - no assembly is required. Each wire is numbered at each end for the correct cylinder. LiveWires have a durable and long lasting silicone jacket and insulation. Spiral wound core prevents electronic interference - no radio noise or computer interference. Available in blue, black, red, yellow & purple. Please specify color in comments box when ordering.
Vendor: Performance Distributors
Ships in 2-3 days

 

86-93 5.0 Firepower Ignition Kit - $279.90

Fits 86-93 Mustang 5.0. The ultimate ignition system for your Mustang! Kit includes the Dyna-mod, Screamin' Demon Coil, Cap and Rotor, and a set of LiveWires. Please specify color of cap and wires in comments box when ordering.
Vendor: Performance Distributors
Ships in 2-3 days

 

94-95 5.0 Firepower Ignition Kit - $279.90

Fits 94-95 Mustang 5.0. The ultimate ignition system for your Mustang! Kit includes the Dyna-mod, Screamin' Demon Coil, Cap and Rotor, and a set of LiveWires. Please specify color of cap and wires in comments box when ordering.
Vendor: Performance Distributors
Ships in 2-3 days

 

84-93 5.0 Performance Distributor - Ford Blue - $319.00

Powdercoated Ford Blue. Performance Distributors is now offering a factory Motorcraft distributor for the 5.0 engines. This distributor is built with our full length oil impregnated bushing for improved shaft rotation and magnetic pick-up coil signals. The new full length bushing replaces the weak upper bushing that is standard on these units. This provides increased durability and more accurate timing signals in the higher rpms. The 5.0 Distributor maintains the "stock appearance" because we use Motorcraft distributor housings. The unit can be powder coated in "Ford Blue" for a very nice custom appearance. The Distributor comes complete with brass terminal cap & rotor, 5.0 Dyna Module and a steel gear for factory roller cams. This is a drop-in OEM replacement distributor for 86-95 Mustangs, so no modifications need to be made to stock wiring.
Vendor: Performance Distributor
Ships in 2-3 days

 

84-93 5.0 Performance Distributor - Std Finish - $289.00

Standard finish, non-powdercoated. Performance Distributors is now offering a factory Motorcraft distributor for the 5.0 engines. This distributor is built with our full length oil impregnated bushing for improved shaft rotation and magnetic pick-up coil signals. The new full length bushing replaces the weak upper bushing that is standard on these units. This provides increased durability and more accurate timing signals in the higher rpms. The 5.0 Distributor maintains the "stock appearance" because we use Motorcraft distributor housings. The unit can be powder coated in "Ford Blue" for a very nice custom appearance. The Distributor comes complete with brass terminal cap & rotor, 5.0 Dyna Module and a steel gear for factory roller cams. This is a drop-in OEM replacement distributor for 86-95 Mustangs, so no modifications need to be made to stock wiring.
Vendor: Performance Distributors
Ships in 2-3 days

 

94-95 5.0 Performance Distributor - Ford Blue - $339.00

Ford Blue, Dyna-module NOT included. Performance Distributors is now offering a factory Motorcraft distributor for the 5.0 engines. This distributor is built with our full length oil impregnated bushing for improved shaft rotation and magnetic pick-up coil signals. The new full length bushing replaces the weak upper bushing that is standard on these units. This provides increased durability and more accurate timing signals in the higher rpms. The 5.0 Distributor maintains the "stock appearance" because we use Motorcraft distributor housings. The unit can be powder coated in "Ford Blue" for a very nice custom appearance. The Distributor comes complete with brass terminal cap & rotor and a steel gear for factory roller cams. This is a drop-in OEM replacement distributor for 86-95 Mustangs, so no modifications need to be made to stock wiring.
Vendor: Performance Distributors
Ships in 2-3 days

 

94-95 5.0 Performance Distributor - Std Finish - $309.00

Standard finish, Dyna-module NOT included. Performance Distributors is now offering a factory Motorcraft distributor for the 5.0 engines. This distributor is built with our full length oil impregnated bushing for improved shaft rotation and magnetic pick-up coil signals. The new full length bushing replaces the weak upper bushing that is standard on these units. This provides increased durability and more accurate timing signals in the higher rpms. The 5.0 Distributor maintains the "stock appearance" because we use Motorcraft distributor housings. The unit can be powder coated in "Ford Blue" for a very nice custom appearance. The Distributor comes complete with brass terminal cap & rotor and a steel gear for factory roller cams. This is a drop-in OEM replacement distributor for 86-95 Mustangs, so no modifications need to be made to stock wiring.
Vendor: Performance Distributors
Ships in 2-3 days

 

86-93 5.0 Billet Performance Distributor - $415.00

Fits 86-93 Mustang 5.0. Performance Distributors 5.0 Billet Distributor is designed to deliver accurate trigger signals to the 5.0L engine. The distributor is made from a solid billet of 6061-T6 aluminum. It is then CNC machined for close tolerances and great looks. Each distributor has a sealed ball bearing at the top of the shaft for strength and to guide the oversized polished steel shaft through the entire rpm range. When making serious horsepower with the 5.0L engine, the stock distributor can be the weak link. The 5.0 Billet Distributor from Performance Distributors is the answer for a strong replacement and good looks. The Billet Distributor comes complete with brass terminal cap & rotor, 5.0 Dyna Module and a steel gear for factory roller cams. This is a drop-in OEM replacement distributor for 86-95 Mustangs with factory style connectors so no modifications need to be made to stock wiring.
Vendor: Performance Distributors
Ships in 2-3 days

 

94-95 5.0 Billet Performance Distributor - $415.00

Fits 94-95 Mustang 5.0. Performance Distributors 5.0 Billet Distributor is designed to deliver accurate trigger signals to the 5.0L engine. The distributor is made from a solid billet of 6061-T6 aluminum. It is then CNC machined for close tolerances and great looks. Each distributor has a sealed ball bearing at the top of the shaft for strength and to guide the oversized polished steel shaft through the entire rpm range. When making serious horsepower with the 5.0L engine, the stock distributor can be the weak link. The 5.0 Billet Distributor from Performance Distributors is the answer for a strong replacement and good looks. The Billet Distributor comes complete with brass terminal cap & rotor, 5.0 Dyna Module and a steel gear for factory roller cams. This is a drop-in OEM replacement distributor for 86-95 Mustangs with factory style connectors so no modifications need to be made to stock wiring.
Vendor: Performance Distributors
Ships in 2-3 days

 

5.0 Billet Aluminum Wire Looms - $59.00

Performance Distributors Livewires are built with a protective heat sleeve that covers the entire length of the wire. Trying to fit the Livewires in factory wire separators is virtually impossible. Nylon zip ties can be used to keep the wires separated but they do not offer a show quality appearance. This led us to build a billet wire loom that will not only keep the wires apart, but offer good looks as well. These billet separators are held together with allen head screws which are mounted flush within the loom. These separators are designed specifically for the Livewires and will not pinch or damage the protective heat sleeving.
Vendor: Performance Distributors
Ships in 2-3 days

 

5.0 130 Amp Alternator - $259.00

Replace the low amperage alternator on your 5.0 with the 130 amp unit from Performance Distributors. This is a brand new alternator that includes the regulator, internal fan, pulley and wiring harness. It mounts in the factory location of 86-93 Mustangs with minor grinding work to the stock bracket. Great for use with underdrive pulleys!
Vendor: Performance Distributors
Ships in 2-3 days

 

Dyna-Batt - $155.00

Lighten up your Mustang! Remove the heavy 40 lb battery and replace it with Performance Distributors 13.5 lb Dyna-Batt. The Dyna Batt produces more power per pound than any battery on the market. It has the cranking power of wet cell batteries three times its size! This is due to the extremely low internal resistance which allows faster, more consistant starting. The Dyna Batt does not have a cold cranking amp rating like other batteries, but has been tested to crank engines with compression ratios as high as 15:1. The reserve capacity of the Dyna Batt is 16 Amp Hours. The Dyna-Batt is completely dry cell and can withstand the rigors of high performance and racing enviornments. It is built with corrosion resistant terminals and is truly maintenance free. The Dyna Batt has an excellent storage life and recharges very quickly. Any 12 volt charger can be used to recharge the Dyna Batt but a low amperage battery charger/maintainer, much like the Surecharge Battery Charger we sell, is recommended. Dimensions of the Dyna Batt are: Length = 7", Width = 3" & Height = 6 1/2". This battery works great with the 5.0 130 amp alternator!
Vendor: Performance Distributors
Ships in 2-3 days

 

4.6 Screamin' Demon Coil Packs - $99.00

Fits 96-98 Mustang, 94-97 T-Bird, 97-99 4.6 Trucks. Open up your spark plug gaps to a whopping.065" when you install our Screamin' Demon Coil Packs. By producing a fatter spark, fuel is burned more efficiently and power is gained. No drop off in power as RPM's go up. Your spark plugs stay cleaner longer. The Screamin' Demon Coil Packs are easy to install, mounting in the original equipment location. They are completely epoxy filled for improved heat transfer and vibration resistant. The Screamin' Demons are too "hot" for stock plug wires.
Vendor: Performance Distributors
Ships in 2-3 days

 

4.6 2V LiveWires - $129.00

Fits 96-98 Mustang, 94-97 T-Bird, 97-99 4.6 Trucks. After bolting on our Screamin' Demon Coil Packs, you'll need a set of "LiveWires" spark plug wires to deliver the hotter spark to your plugs. LiveWires are built with a space age heat resistant sleeving to provide protection from exhaust heat. The sleeving is heat treated glass braid and is non-flammable and non-corrosive to chemicals. Approximately 1/2" in diameter, LiveWires perform great and look awesome! The 4.6 LiveWires are custom fit, so no assembly is required. Each wire is numbered on each end for the correct cylinder. LiveWires do not produce electronic interference such as radio noise and computer interference, due to the spiral wound core. 4.6 LiveWires are available in blue, black, red, purple and yellow. Please specify color in comments box when ordering.
Vendor: Performance Distributors
Ships in 2-3 days

 

4.6 4V LiveWires - $165.00

96-98 Mustang Cobra. After bolting on our Screamin' Demon Coil Packs, you'll need a set of "LiveWires" spark plug wires to deliver the hotter spark to your plugs. LiveWires are built with a space age heat resistant sleeving to provide protection from exhaust heat. The sleeving is heat treated glass braid and is non-flammable and non-corrosive to chemicals. Approximately 1/2" in diameter, LiveWires perform great and look awesome! The 4.6 LiveWires are custom fit, so no assembly is required. Each wire is numbered on each end for the correct cylinder. LiveWires do not produce electronic interference such as radio noise and computer interference, due to the spiral wound core. 4.6 LiveWires are available in blue, black, red, purple and yellow. Please specify color in comments box when ordering.
Vendor: Performance Distributors
Ships in 2-3 days

 

4.6 Billet Aluminum Wire Looms - $79.00

Performance Distributors Livewires are built with a protective heat sleeve that covers the entire length of the wire. Trying to fit the Livewires in factory wire separators is virtually impossible. Nylon zip ties can be used to keep the wires separated but they do not offer a show quality appearance. This led us to build a billet wire loom that will not only keep the wires apart, but offer good looks as well. These billet separators are held together with allen head screws which are mounted flush within the loom. These separators are designed specifically for the Livewires and will not pinch or damage the protective heat sleeving.
Vendor: Performance Distributors
Ships in 2-3 days

 

4.6 2V Firepower Ignition Kit - $307.00

Fits 96-98 Mustang GT, 94-97 T-Bird, and 97-99 4.6 Trucks. Unleash more power and torque from your 4.6! Kits includes Screamin' Demon Coil Packs, LiveWires, and Billet Looms. Please specify color of wires in comments box when ordering.
Vendor: Performance Distributors
Ships in 2-3 days

 

4.6 4V Firepower Ignition Kit - $343.00

Fits 96-98 Mustang Cobra. Unleash more power and torque from your 4.6! Kits includes Screamin' Demon Coil Packs, LiveWires, and Billet Looms. Please specify color of wires in comments box when ordering.
Vendor: Performance Distributors
Ships in 2-3 days

 

01-04 3.8 POWERCABLES - $60.00

Blue 9mm wires Extra thick design Ultra low resistance 100% silicone jacket High heat boots Wire wound mag conductors Cylinder identification labels Custom tailored for perfect fit JBA logo on sleeve
Vendor: JBA
Ships in 2-3 days

 

99-00 3.8 POWERCABLES - $60.00

9MM BLUE WIRES Extra thick design Ultra low resistance 100% silicone jacket High heat boots Wire wound mag conductors Cylinder identification labels Custom tailored for perfect fit JBA logo on sleeve
Vendor: JBA
Ships in 2-3 days

 

94-98 3.8L POWER CABLES - $60.00

9MM BLUE WIRESET Extra thick design Ultra low resistance 100% silicone jacket High heat boots Wire wound mag conductors Cylinder identification labels Custom tailored for perfect fit JBA logo on sleeve
Vendor: JBA
Ships in 2-3 days

 

96-98 4.6L COBRA POWER CABLES - $97.00

9MM BLUE WIRESET Extra thick design Ultra low resistance 100% silicone jacket High heat boots Wire wound mag conductors Cylinder identification labels Custom tailored for perfect fit JBA logo on sleeve
Vendor: Ford Racing
Ships in 2-3 days

 

94-95 5.0L POWER CABLES - $60.00

9MM BLUE WIRESET Extra thick design Ultra low resistance 100% silicone jacket High heat boots Wire wound mag conductors Cylinder identification labels Custom tailored for perfect fit JBA logo on sleeve
Vendor: JBA
Ships in 2-3 days

 

96-02 4.6L POWER CABLES - $97.00

9MM BLUE WIRESET Extra thick design Ultra low resistance 100% silicone jacket High heat boots Wire wound mag conductors Cylinder identification labels Custom tailored for perfect fit JBA logo on sleeve
Vendor: JBA
Ships in 2-3 days

 

289/302/351 POWER CABLES - $60.00

9MM BLUE WIRESET Extra thick design Ultra low resistance 100% silicone jacket High heat boots Wire wound mag conductors Cylinder identification labels Custom tailored for perfect fit JBA logo on sleeve
Vendor: JBA
Ships in 2-3 days

 

3V SPARK PLUG 12MM THREAD - $82.95

M-12405-3V12MM For use in engines with higher than stock cylinder combustion pressures One heat range colder than the stock Mustang GT plug Two heat ranges colder than the stock 5.4L truck 3-valve engine Sold in engine sets of 8 Fits 2008 and newer 3V heads requiring the 12mm thread Note: Engines with late style 12MM spark plugs can be identified by coil engineering number 8L3E Engines with early style 16mm "High Thread" design spark plugs can be identified by coil engineering number 3L3E part number
Vendor: Ford Racing
Ships in 3-4 days

 

MINI STARTER SMALLBLOCK 1.4 KW - $249.00

M-11000-B51 1.4 kw Super Hi-torque Starter Small diameter mini-starter — great for additional header clearance Weighs approximately 5 lbs. less than production starter, yet provides more cranking power Comes with special battery cables and instructions. Must use firewall solenoid Fits most 289/302/351W/351C engines except 164-tooth manual transmission
Vendor: Ford Racing
Ships in 3-4 days

 

9MM 5.0 SPARK PLUG WIRE SET - BLACK "FORD RACING" - $45.00

5.0/5.8 Black Wire. Wire-wound Custom Ignition Wire Sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire.
Vendor: Ford Racing
Ships in 24 hours

 

9MM 5.0 SPARK PLUG WIRE SETS - BLUE "FORD RACING" - $45.00

5.0/5.8 Blue. Wire-wound Custom Ignition Wire Sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire.
Vendor: Ford Racing
Ships in 24 hours

 

9MM 5.0 SPARK PLUG WIRE SETS - RED "FORD RACING" - $45.00

5.0/5.8 RED. Wire-wound Custom Ignition Wire Sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire.
Vendor: Ford Racing
Ships in 24 hours

 

9MM 5.0 SPARK PLUG WIRE SET - YELLOW "FORD RACING" - $45.00

5.0/5.8 Yellow Wire Wire-wound Custom Ignition Wire Sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire.
Vendor: Ford Racing
Ships in 24 hours

 

9MM 4.6 2V SPARK PLUG WIRES - BLUE "FORD RACING" - $75.00

4.6 2V Blue Wire-wound Custom Ignition Wire Sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire.
Vendor: Ford Racing
Ships in 24 hours

 

9MM 4.6 2V SPARK PLUG WIRES - RED "FORD RACING" - $75.00

4.6 2V Red Wires Wire-wound Custom Ignition Wire Sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire.
Vendor: Ford Racing
Ships in 24 hours

 

9MM 4.6 4V SPARK PLUG WIRE SETS - BLUE "FORD RACING" - $110.00

Fits 4.6 4V Blue Wires Wire-wound Custom Ignition Wire Sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire.
Vendor: Ford Racing
Ships in 24 hours

 

9MM 4.6 4V SPARK PLUG WIRES - RED "FORD RACING" - $110.00

4.6 4V Red Wires Wire-wound Custom Ignition Wire Sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire.
Vendor: Ford Racing
Ships in 24 hours

 

HIGH TORQUE MINI STARTER 1.6KW - $249.00

M-11000-MT164 1.6 kw Hi-torque Starter Small diameter mini-starter — great for additional header clearance Weighs approximately 5 lbs. less than pre-1989 production starters, yet provides more cranking power Comes with special battery cables and instructions. Must use firewall solenoid Fits most 289/302/351W/351C engines with 164 tooth manual transmission flywheel
Vendor: Ford Racing
Ships in 3-4 days

 

CONTROL PACK 4.6L 3V CRATE ENGINES - $1,199.00

M-6017-463V Take the complexity and mystery out of wiring a late model 4.6L 3V engine! Designed to run M-6007-A463NA and M-6007-3V46 4.6L 3 Valve crate engines Includes PCM with Ford Racing calibration Includes Ford Racing cold air kit M-9603-GTB minus the Pro-Cal tool (PCM included with the Control Pack already contains the Ford Racing calibration) Includes Electronic Throttle Control accelerator pedal eliminates throttle cable routing problems Unique harness connects to stock engine harness and is designed for streetrod installation Features OBD-II port to assist in vehicle calibration upload and problem diagnosis Includes unique downsized power distibution module, zip tub and MAF sensor with bolts PCM with Ford Racing calibration requires return type fuel system, will not work with returnless fuel system NOTE: Installation of this PCM in a 2005-09 Mustang GT will result in a no-start condition. See "Tip sheets" for more tech tips about E.F.I.
Vendor: Ford Racing
Ships in 10-14 days

 

CONTROL PACK-5.4L 4V SUPERCHARGED CRATE ENGINE - $1,800.00

M-6017-54SC* Take the complexity and mystery out of wiring a late model 5.4L 4V supercharged engine! Designed to run M-6007-C54 and M-6007-TVS 5.4L supercharged crate engines Includes PCM with Ford Racing calibration Includes Ford Racing cold air kit M-9603-SVT07 minus the Pro-Cal tool (PCM included with the Control Pack already contains the Ford Racing calibration) Includes Electronic Throttle Control accelerator pedal eliminates throttle cable routing problems Unique harness connects to stock engine harness and is designed for streetrod installation Features OBD-II port to assist in vehicle calibration upload and problem diagnosis Includes unique downsized power distibution module, zip tub, MAF sensor with bolts and thermostat housing with hoses PCM with Ford Racing calibration requires return type fuel system, will not work with returnless fuel system NOTE: Installation of this PCM in a 2007-09 SVT Mustang will result in a no-start condition. See "Tip sheets" for more tech tips about E.F.I.
Vendor: Ford Racing
Ships in 10-14 days